prtlndA1k# run scripts global
prtlndA1k# global
...
prtlndA1k(gbl)# exit
prtlndA1k# ...
SWITCH# run scripts running-B
SWITCH# config
SWITCH(cfg)# hostname prtlndA1kB
prtlndA1kB(cfg)# ...
prtlndA1kB(cfg)# exit
prtlndA1kB# ...
CLI Maintenance Guide
Restoring to One Peer
If you are only restoring the config on one switch, run its running-config script to set
up networking and rejoin the switch with its waiting peer. The switch downloads the
global config when it joins the redundant pair. If you want to replace the global-config
too, run the global-config script on the peer (Senior) switch after the pair has joined.
For example, the following sequence restores the running-config and rejoins its peer.
It does not restore the global config:
Backing Up the Running Configuration
Restoring the Configuration
3-23