Showing Namespace Status - Acopia Adaptive Resource Switch Cli Maintenance Manual

---------------------------------------------------------------------------------------
Fri Jul 21 03:55:08
bstnA6kB(cfg)# ...
bstnA6k(cfg)# show namespace status all
Namespace: wwmed
Description:
Share
NFS Export
------------------------- ------------------------------------- -----------
Volume: /acct
budget
NFS: /exports/budget
metadata-share
NFS: /vol/vol1/meta1
bills
NFS: /work1/accting
bills2
NFS: /data/acct2
CLI Maintenance Guide
(0) - No active alarms.

Showing Namespace Status

The
show namespace status all
volumes, and shares. This is described in the
"Monitoring the Import" on page
"Enabled." Each share should have a Status of "Online;" if the switch or switches
were powered off for more than 72 hours, they may be "Pending" or "Importing" for
some time before they transition to an "Online" state.
For example, the namespaces on "bstnA6k" have all volumes enabled and all shares
online:
Filer
das1
nas1
das8
das3
command shows the state of all namespaces,
CLI Storage-Management
9-55. The "Status" for each volume should be
Powering Down the ARX
Restoring Power
Guide; see
Status
Enabled
Online
Online
Online
Online
11-5