Showing The Documentation For A Syslog Message - Acopia Adaptive Resource Switch Cli Maintenance Manual

Troubleshooting Tools
Accessing the Syslog

Showing the Documentation for a Syslog Message

bstnA6k(gbl)# grep RON_SPFD logs syslog tail 5
2006-04-10T15:44:27.030+0000:SWITCH:1-1-SCM-1942:RON_SPFD-0-5-RON_SYSTEM_CLOCK_C
HANGED:: System clock changed, adjusting schedule by -2 seconds, 536247
microseconds.
2006-04-10T18:43:39.785+0000:SWITCH:1-1-SCM-21992:CLI-0-5-CLI_COMMAND:: User
admin: Command: SWITCH# grep RON_SPFD logs syslog tail 10
bstnA6k(gbl)# show documentation RON_SYSTEM_CLOCK_CHANGED
RON_SYSTEM_CLOCK_CHANGED documentation:
The RON Shortest Path First Daemon has adjusted its internal schedule in response
to a system clock change.
bstnA6k(gbl)# ...
prtlndA1k(gbl)# namespace nemed
prtlndA1k(gbl-ns[nemed])# metadata internal
% ERROR: HA_NO_INTERNAL_METADATA (38010911):
Internal metadata is not allowed while redundancy is enabled.
prtlndA1k(gbl-ns[nemed])# show documentation HA_NO_INTERNAL_METADATA
6-24
Many syslog messages (as well as messages from the CLI) have more-verbose
documentation associated with them; you can access this additional documentation
from the CLI. From any mode, use the
documentation for a given message:
show documentation msg-catalog-id
where msg-catalog-id (1-255 characters) identifies the message. This ID appears
with the message in both the syslog (recall the id field in each syslog message;
see "Syslog Syntax" on page
For example, the following command sequence shows some syslog messages, then
shows the documentation for one of them:
As another example, this command sequence gets an error from the CLI, then checks
the documentation for the error:
show documentation
6-16) and in CLI output.
command to view the
CLI Maintenance Guide