Retaining Nothing From The Share; Reinstating The Share - Acopia Adaptive Resource Switch Cli Maintenance Manual

Clients cannot access the volume while it is destaged. NFS clients must unmount and
remount after the volume comes back online. Additionally, all NFS and CIFS services
that host the volume experience a brief (roughly 10-second) outage.
bstnA6k(gbl)# end
bstnA6k# nsck wwmed destage volume /acct
This operation will remove entries for all shares in the volume
from the namespace metadata. To reimport a destaged share,
enable the share in namespace-volume-share mode.
Destage all shares from volume /acct in namespace wwmed? [yes/no] yes
bstnA6k# global
bstnA6k(gbl)# namespace wwmed
bstnA6k(gbl-ns[wwmed])# volume /acct
bstnA6k(gbl-ns-vol[wwmed~/acct])# no share budget
bstnA6k(gbl-ns-vol[wwmed~/acct])# enable shares
bstnA6k(gbl-ns-vol[wwmed~/acct])# ...
CLI Maintenance Guide

Retaining Nothing from the Share

To remove all traces of the share, you must remove all of the share's directories from
the volume's directory tree. This is a serious change in the volume's metadata, and it
requires that you take the volume offline. Use
(recall "De-Staging a Volume" on page
re-enable all of the shares (as shown in
page 9-53 of the storage-management manual).
For example, the following command sequence shuts down the "wwmed~/acct"
volume, removes the "budget" share, and then enables all of the remaining shares at
once:

Reinstating the Share

If you want to bring the share back into the volume, repeat its original configuration.
When you enable the share in the already-enabled volume, the volume imports the
share's files and directories.
Troubleshooting Managed Volumes
Correcting Share-Import Errors
nsck ... destage
5-40), remove the share from the volume, then
"Enabling All Shares in the Volume" on
to take the share offline
8-49