Showing Statistics From One Filer Share - Acopia Adaptive Resource Switch Cli Maintenance Manual

CLI Maintenance Guide

Showing Statistics from One Filer Share

To focus on the statistics from one share, use the
statistics filer dataplane
show statistics filer dataplane filer filer-name share share-name
where
filer-name (1-64 characters) identifies the desired filer and
share-name (1-1024 characters) identifies the filer-share.
For example, the following command shows share statistics from the "budget" share
on the "das1" filer:
bstnA6k> show statistics filer dataplane filer das1 share budget
Share Statistics Summary:
-------------------------
Namespace : "wwmed", Share Name: "budget"
Volume : "/acct"
Filer: "das1"
NFS Export: "/lhome/budget"
Read:
Read Calls:
Write:
Write Calls:
Average Latency:
Other Calls:
All Calls:
bstnA6k>
Troubleshooting Managed Volumes
command:
26,797,768 Bytes
23,764,102 Bytes
Showing Share Statistics
clause in the
filer ... share
3,868 Total
3,342 Total
2.44 MilliSeconds
12,133 Total
19,343 Total
show
8-13