Troubleshooting Managed Volumes
Showing Policy History for a Volume
2008-01-29T05:54:57
2008-01-29T05:55:01
2008-01-29T06:33:25
Created.
2008-01-29T06:33:25
2008-01-29T06:33:36
2008-01-29T06:33:36
2008-01-29T06:33:40
2008-01-29T06:36:57
bstnA6k(gbl)# ...
Showing Detailed Status for a Particular Rule
bstnA6k(gbl)# show policy history wwmed /acct docs2das8
Namespace:
wwmed
Volume:
/acct
Rule
----------------------------------------
docs2das8
Time
--------------------
2008-01-29T05:54:47
2008-01-29T05:54:48
2008-01-29T05:54:57
2008-01-29T05:55:01
bstnA6k(gbl)# ...
8-78
Rule [wwmed:/acct:docs2das8]: Starting scan.
Rule [wwmed:/acct:docs2das8]: Scan complete.
Rule [wwmed:/acct:wwmed:/acct:drain_share_rule_for_share_it5]:
Rule [wwmed:/acct:drain_share_rule_for_share_it5]: Enabled.
Rule [wwmed:/acct:drain_share_rule_for_share_it5]: Starting scan.
Rule [wwmed:/acct:drain_share_rule_for_share_it5]: Scan complete.
Rule [wwmed:/acct:drain_share_rule_for_share_it5]: Disabled.
Rule [wwmed:/acct:fm1]: Reset.
If you add the name of a rule or share-farm, detailed status for the object appears:
show policy history namespace vol-path rule-name
where
namespace (1-30 characters) is the namespace,
vol-path (1-1024 characters) identifies the volume to examine, and
rule-name (1-1024 characters) is one rule or share farm.
The output shows detailed events for the given policy object. For example, the
following command sequence shows the policy history for the "dos2das8" rule:
Message
------------------------------------------------------------
Enabled.
Scan interrupted by a configuration or scheduled update.
Starting scan.
Scan complete.
CLI Maintenance Guide