Saving The Config Off To An Ftp Server - Acopia Adaptive Resource Switch Cli Maintenance Manual

Saving the Config Off to an FTP Server

bstnA6k(cfg)# exit
bstnA6k# copy running-config ftp://juser:jpasswd@ftp.wwmed.com/oct24lcl
bstnA6k# ...
CLI Maintenance Guide
scripts
running
To save the running config off to a remote FTP server, use a URL in place of the
destination filename. Follow the URL format below:
copy running-config ftp://[username:password@]ftp-site/file
where
username:password@ (optional) is an FTP username and password (the
default is the username/password set by the
above),
ftp-site identifies the FTP server with an IP address or FQDN (for example,
"172.16.88.3" or "ftp.myftpsite.com"), and
file is the chosen file name. Lead with an extra "/" if the path starts at the
root of the server machine; for example, "aramis//var/cfg/running-config"
specifies "/var/config/running-config" on server aramis. Omit the leading
slash if the file is going to the home directory for username.
For example, the following command exits from cfg mode to priv-exec mode, then
sends the running config to ftp.wwmed.com:
Backing Up the Running Configuration
Saving the Local Running Config
Sep 19 05:03 5.7k
ip ftp-user
command, described
3-3