Clearing Sync Operations From The Output - Acopia Adaptive Resource Switch Cli Maintenance Manual

Metadata Utilities: nsck and sync
Synchronizing Metadata with Actual Files
5-28

Clearing Sync Operations from the Output

The command displays a running history of all sync operations. The
show sync
history goes back indefinitely, so the command can display a very large number of
records over time. You can clear all of these records at once, or all records for a
particular namespace, volume, or path. From priv-exec mode, use the
command:
clear sync {files | directories} [namespace [volume vol-path [path
path]]]
where
files | directories chooses the type of sync record to clear,
namespace (optional, 1-30 characters) identifies one namespace from which
to clear sync records. If this option is omitted, the command clears all
sync-files or sync-directories records from the history.
vol-path (optional, 1-1024 characters) narrows the scope to one managed
volume, and
path (optional, 1-1024 characters) narrows the scope further to a specific
virtual path. This is relative to the vol-path.
Before clearing the records, a prompt requests confirmation; enter yes to confirm.
After you clear the records, they no longer appear in the
For example, this command sequence shows all sync-file records, clears them, then
shows that there are none remaining:
bstnA6k(gbl)# show sync files
Namespace: wwmed
Volume: /acct
...
Found Items:
Synchronized Items: 1
show sync
0
CLI Maintenance Guide
clear sync
output.