Troubleshooting Network Connections; Pinging An Ip Address - Acopia Adaptive Resource Switch Cli Maintenance Manual

Pinging an IP Address

CLI Maintenance Guide
This chapter describes the following tools and procedures for troubleshooting the
ARX's network connections:
• Ping,
• Traceroute,
• TTCP,
• tracing NSM processes,
• packet capture, and
• Port mirroring
The next chapter discusses tools for troubleshooting managed volumes.
From any mode, use the
interface:
ping ip-address
where ip-address (for example, 10.10.10.1) is the destination for the ping.
The ARX pings the IP address repeatedly until you stop it by pressing <Ctrl-C>.
Once you stop it, a report summarizes the results of the ping test.
For example:
Troubleshooting Network
command to send an ICMP ECHO request to another
ping
Chapter 7
Connections
7-1