Restoring The Local And Global Configs - Acopia Adaptive Resource Switch Cli Maintenance Manual

Backing Up the Running Configuration
Restoring the Configuration

Restoring the Local and Global Configs

In a redundant pair, the global config is shared by both switches. If you restore the global
config (either alone or as part of the startup config), you overwrite all global parameters
for both switches in the pair. We recommend restoring the running-config first, rejoining
the redundant pair, then restoring the global config, as outlined in the next section.
3-20
bstnA6k# delete startup-config
Delete file 'startup-config' in directory 'configs'? [yes/no]
yes
bstnA6k# reload
Reload the entire chassis? [yes/no] yes
Broadcast message (Fri Feb
The system is going down for reboot NOW!
...
Wait for the machine to reboot, then log back in through the serial CONSOLE port.
(With the configuration erased, the MGMT port and all inband (VLAN) management
interfaces are unavailable.) For example:
User Access Authentication
SWITCH login: admin
Password: password
System authenticating at device scope.
From priv-exec mode, use the
run scripts script-name
where script-name (1-255 characters) identifies the running-config script. Use
for a list of available scripts.
show scripts
6 15:06:47 2004):
command to run each running-config script:
run
CLI Maintenance Guide