Disabling Logs From An Nsm Processor - Acopia Adaptive Resource Switch Cli Maintenance Manual

Troubleshooting Network Connections
Tracing NSM Processes in the "fastpath" Log
5
5
5
Component
-------------------------------------------------------------------
TEM_CIFS
TEM_CIFS
TEM_CIFS
...

Disabling Logs from an NSM Processor

7-18
1
2
3
Trace Level
6
Remember to stop all NSM processors from logging as soon as you finish your
tracing session; NSM logging degrades performance. Use
to disable logging from a certain processor:
processor
no logging fastpath processor slot.processor
where
slot (1-6; 1 on an ARX®1000 or ARX®500) is the slot number of the
desired NSM, and
processor (1-6) is the processor number. Use
list of processors (and their modules and slots) on the ARX.
For example, the following command sequence stops three NSM processors from
logging:
bstnA6k(cfg)# no logging fastpath processor 3.1
bstnA6k(cfg)# no logging fastpath processor 3.2
bstnA6k(cfg)# no logging fastpath processor 3.3
bstnA6k(cfg)# ...
Filter Type Filter String
inclusive 192.168.25.15
inclusive 172.16.100.183
no logging fastpath
for a complete
show processor
CLI Maintenance Guide