Focusing On One Nsm Processor - Acopia Adaptive Resource Switch Cli Maintenance Manual

Troubleshooting CIFS Services
Listing Open Files in a CIFS Service
3.4 172.16.100.68
medarch\mhoward_md
File:\rcrds\2004
3.6 172.16.100.6
medarch\juser
File:\rcrds\2004\infarction_stats.xsl
3.6 172.16.100.6
medarch\juser
File:\rcrds\2004\planB\jmilton_rcrd.dat
3.6 172.16.100.6
medarch\juser
File:\rcrds
3.6 172.16.100.6
medarch\juser
File:\rcrds\mmo_medical_record.dat
3.6 172.16.100.6
medarch\juser
File:\rcrds\flu_vaccine.list
Total number of files displayed is 8.
bstnA6k> ...

Focusing on One NSM Processor

9-10
524 Read
0 0
586 Read+Write
16395 0
758 Read+Write
49158 0
898 Read
0 0
945 Read+Write
16393 0
1046 Read+Write
32781 0
As mentioned above, each CIFS session is managed by a single NSM processor. If
you show the open files at a single CIFS service, you can further narrow the focus to a
single NSM processor. To accomplish this, identify the processor after the FQDN for
the CIFS service:
show cifs-service open-files fqdn slot.processor
where
fqdn (1-128 characters) identifies a single CIFS service,
slot (1-6 in the ARX®6000, 1 in all other platforms) is the slot number of the
desired NSM, and
processor (1-6) is the NSM-processor number. Use
complete list of processors (and their modules and slots) on the ARX.
192.168.25.15 Y2004
0.0.0.0
192.168.25.15 Y2004
192.168.25.20 Y2004
192.168.25.15 Y2004
192.168.25.20 Y2004
192.168.25.15 ARCHIVES
0.0.0.0
192.168.25.15 ARCHIVES
192.168.25.20 histories
192.168.25.15 ARCHIVES
192.168.25.29 prescriptions
for a
show processor
CLI Maintenance Guide