Restoring Power; Verifying Successful Power-Up; Showing Overall Health - Acopia Adaptive Resource Switch Cli Maintenance Manual

Powering Down the ARX

Restoring Power

Restoring Power

Verifying Successful Power-Up

bstnA6k(cfg)# show health
System Health Information
Date
---------------------------------------------------------------------------------------
Fri Jul 21 03:54:38
bstnA6k(cfg)# ...
bstnA6kB(cfg)# show health
System Health Information
Date
11-4
To watch the boot-up messages as the system powers up, you can connect a serial line
to the ARX's Console port. Each Hardware Installation guide shows the location of
this port, a 9600-baud, 8-N-1 terminal.
Turn the power back on with the power button or switch(es). The boot sequence takes
more than one minute to complete. After the boot sequence finishes, the Console
prompts for authentication:
...
User Access Authentication
Username:
Use the CLI to verify that all services are back online.

Showing Overall Health

The command should not indicate any open alarms. For example, this
show health
system is in good overall health:
ID Event
(0) - No active alarms.
Repeat this command on the redundant switch if you have one. This example shows
that the peer switch is also in good overall health:
ID Event
Description
Description
CLI Maintenance Guide