Limiting The Ping Count - Acopia Adaptive Resource Switch Cli Maintenance Manual

Troubleshooting Network Connections
Pinging an IP Address
bstnA6k# ping 172.16.22.183
PING 172.16.22.183 (172.16.22.183) 0 data bytes
8 bytes from 172.16.22.183: icmp_seq=1 ttl=60 time=1 ms. from 3.5
8 bytes from 172.16.22.183: icmp_seq=2 ttl=60 time=1 ms. from 3.5
8 bytes from 172.16.22.183: icmp_seq=3 ttl=60 time=1 ms. from 3.5
8 bytes from 172.16.22.183: icmp_seq=4 ttl=60 time=1 ms. from 3.5
8 bytes from 172.16.22.183: icmp_seq=5 ttl=60 time=1 ms. from 3.5
8 bytes from 172.16.22.183: icmp_seq=6 ttl=60 time=1 ms. from 3.5
8 bytes from 172.16.22.183: icmp_seq=7 ttl=60 time=1 ms. from 3.5
8 bytes from 172.16.22.183: icmp_seq=8 ttl=60 time=1 ms. from 3.5
8 bytes from 172.16.22.183: icmp_seq=9 ttl=60 time=1 ms. from 3.5
<Ctrl-C>
-------172.16.22.183 ping statistics
9 packets transmitted, 9 packets received, 0% packet loss
round-trip min/avg/max 1/1/1 ms
bstnA6k# ...

Limiting the Ping Count

bstnA6k# ping 172.16.22.183 count 4
PING 172.16.22.183 (172.16.22.183) 0 data bytes
8 bytes from 172.16.22.183: icmp_seq=1 ttl=60 time=2 ms. from 3.5
8 bytes from 172.16.22.183: icmp_seq=2 ttl=60 time=2 ms. from 3.5
8 bytes from 172.16.22.183: icmp_seq=3 ttl=60 time=2 ms. from 3.5
8 bytes from 172.16.22.183: icmp_seq=4 ttl=60 time=2 ms. from 3.5
7-2
To limit the number of pings up front, use the
ping ip-address count number
where
ip-address is the destination for the ping, and
number (1-10,000) is the number of pings to send.
For example:
clause with the
count ping
CLI Maintenance Guide
command: