Removing The Share Asynchronously - Acopia Adaptive Resource Switch Cli Maintenance Manual

Prepare Stop Time:
Prepare Elapsed Time:
----------------------------------------------------------
Commit Phase:
============================================================
----------------------------------------------------------
Commit Start Time:
----------------------------------------------------------
Number of Directories Evaluated:
Number of Files Removed:
----------------------------------------------------------
Commit Stop Time:
Commit Elapsed Time:
----------------------------------------------------------
**** Elapsed time:
**** Storage Remove Report: DONE at Wed Mar
bstnA6k# ...

Removing the Share Asynchronously

CLI Maintenance Guide
Wed Mar
00:00:00
Wed Mar
Wed Mar
00:00:00
00:00:05
By default, the CLI waits for the share removal to finish before allowing you to enter
any more commands. Add the
CLI immediately after confirming the removal:
remove-share migrate namespace volume share destination async
This produces a brief report that summarizes the results, in addition to the
more-extensive report described above. The CLI shows the name of the report after
you enter yes to proceed.
For example:
bstnA6k(gbl)# end
Troubleshooting Managed Volumes
1 15:38:47 2006
1 15:38:47 2006
251
0
1 15:38:47 2006
1 15:38:52 2006 ****
flag at the end of the command to return to the
async
Removing an Imported Share
8-21