Acopia Adaptive Resource Switch Cli Maintenance Manual page 233

Table 8-1. Share Status Conditions (Continued)
Status Condition
Error: Authentication error during
import.
Error: Bad Export Path/Share Name
Error: CIFS error during import scan.
Error: CIFS filer connection limit
reached.
Error: CIFS operation failed with an
error during import.
CLI Maintenance Guide
Description/Action
The ARX does not have proper permissions to connect to the
back-end filer.
For NFS exports, check your back-end filer configuration: the
back-end share should allow root access to all of the ARX's
proxy IP addresses. Use the
permission settings at the filer. Use the
command to list all configured proxy IP addresses.
For CIFS shares, the switch uses the namespace's proxy user
(username and password). The proxy-user credentials must
belong to the Backup Operator's group at every filer behind the
namespace. The
proxy-user (gbl-ns)
user credentials for a namespace.
The share cannot be found on the external filer. Use the
command to change the path or share name for this share, then
retry the import.
(CIFS) This is a CIFS error that is not an access or network
error, but prevented the import. The syslog shows the specific
error. Use
show logs syslog
to search for a specific string in the syslog.
syslog
After you correct the error, retry the import.
(CIFS) The back-end filer imposes a limit on CIFS connections,
and the import requires more connections than the filer allows.
Correct this at the back-end filer and then retry the import.
(CIFS) The back-end filer returned an unexpected CIFS error
during import. The syslog shows the specific error. Use
to read the syslog, or
logs syslog
for a specific string in the syslog. You may need to escalate to
Acopia Support.
After you correct the error, retry the import.
Troubleshooting Managed Volumes
Correcting Share-Import Errors
command examine all
show exports
show ip proxy-addresses
command sets the proxy
to read the syslog, or
grep string logs syslog
filer
grep string logs
show
to search
8-27