Label A Scene (Optional); Enable/Disable Daylighting Per Scene - Lutron Electronics GRAFIK Eye QSGRJ-3P Installation And Operation Manual

Scene Setup

Label a Scene (optional)

1. Enter programming mode (see
Main menu
page 15).
Timeclock
2. Use the Master buttons to highlight
"Scene setup" and press the
Scene setup
OK button to accept.
3. Use the Master buttons to highlight
Scene setup
"Labels" and press the OK button
to accept.
Levels
4. Use the Master buttons to highlight
Labels
Labels
your desired scene. Press the
OK button to accept.
5. Use the Master buttons to highlight
Select scene:
"Custom" and press the OK button
to accept.
Scene 1
6. Use the Master buttons to
scroll through the characters
(lowercase and uppercase letters,
Label scene 1
plus numbers 0 through 9).
The character you are currently
Custom
changing will be underlined on
the screen. Press OK to select the
character you want, then repeat
for all available characters. Choose
Label scene 1
a space (no character) and press
OK for any remaining characters.
1 / 11
A
Press the OK button to accept.
1: A
7. The info screen will confirm that
your name has been saved.
8. Exit programming mode (see page
15).
Saved
®
1 2 3 4 5

Enable/Disable Daylighting per Scene

Scene setup
Labels
Labels
Daylighting
Select scene:
Scene 1
Daylighting
Enabled
Saved
6
1. Enter programming mode (see page 15).
2. Use the Master buttons to highlight "Scene
setup" and press the OK button to accept.
3. Use the Master buttons to highlight
"Daylighting" and press the OK button to
accept.
4. Use the Master buttons to highlight your
desired scene. Press the OK button to accept.
5. Use the Master buttons to select "Enabled" or
"Disabled". When a scene is disabled, it will
not respond to any commands from daylight
sensors assigned to the control unit. Press OK
to save.
6. Exit programming mode (see page 15).
GRAFIK Eye QS Installation and Operation Guide 32
®
Master
buttons
OK
OK
button