Set Location; Set Daylight Saving Time - Lutron Electronics GRAFIK Eye QSGRJ-3P Installation And Operation Manual

Timeclock Operation

Set Location

1. Enter programming mode (see page 15).
Main menu
2. Use the Master buttons to highlight
Timeclock
Timeclock
"Timeclock" and press the OK button to
Scene setup
accept.
3. Use the Master buttons to highlight
"Location" and press the OK button to
Timeclock
accept.
4. Use the Master buttons to set your
Time & date
location by either country and city
Location
or latitude and longitude. Press the
OK button to accept.
5. Use the Master buttons to highlight the
Location by
country and press the OK button to
accept. Repeat for the state and closest
Country, City
city.
Lat/Longitude
6. The info screen will confirm that your
time and date have been saved.
7. Exit programming mode (see page 15).
Country
08 : 00
USA
State
Pennsylvania
City
Philadelphia
®
1
Saved
2 3 4 5 6

Set Daylight Saving Time

Timeclock
Location
Set DST
DST
Del: 00
Yes
GRAFIK Eye
OK
1. Enter programming mode (see page
15) and select "Timeclock". Use
the Master buttons to highlight "Set
DST" and press the OK button to
accept.
2. Use the Master buttons to highlight
"YES" if your location observes
daylight saving time, or "NO" if it
does not. Press the OK button to
accept.
3. If yes, use the Master buttons to
choose either "USA 2007" (the
second Sunday in March to the first
Sunday in November), or "Other."
For "Other," follow the screens to
set start and end dates and amount
of time.
4. Press the OK button to accept. The
info screen will confirm that your
time and date have been saved.
5. Exit programming mode (see page
15).
QS Installation and Operation Guide 36
®
Master
buttons
OK
button