Labeling A Scene (Optional); Enabling/Disabling Daylighting In A Scene - Lutron Electronics GRAFIK Eye QSGRN-6PCE Installation And Operation Manual

Scene Setup

Labeling a Scene (optional)

1. Enter programming mode.
Main menu
2. Use the Master buttons to highlight
Timeclock
"Scene setup" and press the
OK button to accept.
Scene setup
3. Use the Master buttons to highlight
"Labels" and press the OK button to
Scene setup
accept.
4. Use the Master buttons to highlight
Levels
your desired scene. Press the
Labels
Labels
OK button to accept.
5. Use the Master buttons to highlight
"Custom" and press the OK button
Select scene:
to accept.
6. Use the Master buttons to scroll
Scene 1
through the characters (lowercase
and uppercase letters, plus numbers
0 through 9). The character you are
Label scene 1
currently changing will be underlined
on the screen. Press OK to select
Custom
the character you want, then repeat
for all available characters. Choose
a space (no character) and press OK
for any remaining characters. Press
Label scene 1
the OK button to accept.
1 / 10
7. The info screen will confirm that
A
1: A your name has been saved.
8. Exit programming mode.
Saved
®
1 2 3 4 5

Enabling/Disabling Daylighting in a Scene

Scene setup
Labels
Labels
Daylighting
Daylighting
Scene 1
Scene 1
Daylighting
Enable
Saved
GRAFIK Eye
6
1. Enter programming mode.
2. Use the Master buttons to highlight "Scene
setup" and press the OK button to accept.
3. Use the Master buttons to highlight
"Daylighting" and press the OK button to
accept.
4. Use the Master buttons to highlight your
desired scene. Press the OK button to accept.
5. Use the Master buttons to select "Enable" or
"Disable". When daylighting is disabled in a
scene, the GRAFIK Eye
not respond to daylight sensors information
when that scene is active.
Press OK to save.
6. Exit programming mode.
QS Control Unit Installation and Operation Guide 22
®
Master
buttons
OK
OK
button
QS control unit will
®