Name A Group Of Shades - Lutron Electronics GRAFIK Eye QSGRJ-3P Installation And Operation Manual

Adjusting Shade Settings
(for Wired and Wireless Sivoia

Name a Group of Shades

1. Enter programming mode (see page 15).
Main menu
2. Use the Master buttons to highlight "Shade Labels" and press
Zone Setup
the OK button to accept.
Shade Labels
3. Use the Master buttons to highlight your desired shade group.
Press the OK button to accept.
4. Use the Master buttons to highlight "Custom" and press the
Select group
OK button to accept.
5. Use the Master buttons to scroll through the characters
Shade Grp 1
(lowercase and uppercase letters, plus numbers 0 through 9).
The character you are currently changing will be underlined
on the screen. Press OK to select the character you want,
then repeat for all available characters. Choose a space (no
Label shade grp
character) and press OK for any remaining characters. Press
the OK button to accept.
Custom
6. The info screen will confirm that your name has been saved.
7. Exit programming mode (see page 15).
Label shade grp 1
1 / 11
A
1: A
Saved
®
QS Shades/Drapes)
®
1 2 3 4 5 6
GRAFIK Eye
OK
QS Installation and Operation Guide 48
®
Master
buttons
OK
button