Quick Scene Programming; Save By Ok Mode - Lutron Electronics GRAFIK Eye QSGRJ-3P Installation And Operation Manual

Quick Scene Programming

Save by OK Mode

By default, the GRAFIK Eye
"Save by OK" mode, which allows you
to quickly set scenes without entering
program mode.
1. Press the button for the scene you want
to set; its LED will light and the lights will
go to the current settings.
2. Use the zone raise/lower buttons to set
all lights to the desired levels. Press the
OK button.
3. To set the fade time to Off for this scene,
press the OK button, then use the Master
buttons to set the desired fade time to
Off. Press the OK button to save.
Notes
• Using the Master buttons to raise or
lower lighting settings is still temporary.
• To set a zone to unaffected (---), press
and hold the zone lower button for 6
seconds after the zone has gone to 0%
light level.
®
QS is in
®
1 2 3 4 5
1. Press the scene button you wish to
program.
2. Use the zone raise/lower buttons to set
light levels.
3. Use the Master buttons to set fade time
to Off.
GRAFIK Eye
6
QS Installation and Operation Guide 34
®
OK