EPSON AcuLaser CX11/CX11F
RECEPTION SETUP ITEMS
Setup menu
Setup items
Paper Cassette
Auto, MPtray, Cassette
Incomming Mode
Auto switching, Fax only,
Phone only, TAM
Timeout
1 - 99
DRPD*3
Normal, All
Note *1: Fax reception settings cannot be changed as long as there are jobs stored in the
memory.
*2: Auto reducing function works all the time.
*3: - DRPD=Distinctive Ring Pattern Detection
- North America only
SPEED DIAL SETUP ITEMS
Setup menu
Setup items
Individual Speed Dial
Register, Delete
One-touch Dial
Register, Delete
Clear Speed Sial
No, Yes
Note *1: Displays the list of all the registered fax numbers, and indicates the speed dial
numbers not in use. If you wish to change the speed dial number, press Up/Down or
Ten-key until desired number shows up. Press the Right button to select the number.
If unregistered number is chosen, then you can register new fax number. If registered
number is selected, the registered information will be deleted. The registered
information cannot be edited nor corrected. Adding new numbers and deleting the
registered information are possible. In the speed dial register process, fax numbers
should be entered using the Ten-key. To delete the information, press the Right
button after confirmation screens appears. When the information is either deleted or
cleared, the alert screen appears for confirmation.
*2: Fax speed dial settings cannot be changed as long as there are jobs stored in the
memory.
Remarks
---
---
unit: second(s)
---
Remarks
1 - 60
A - C
Clears all the speed dial numbers.
manuals4you.com
manuals4you.com
FAX COMMUNICATION MANAGEMENT SETUP ITEMS
Setup menu
Activity Report
On, Off
Transmission Report
At each transmission, On error, Off
Multipie Trans report
At each transmission, On error, Off
Note *:
Fax communication management setting cannot be changed as long as there are jobs
stored in the memory.
FAX FACTORY DEFAULT SETUP ITEMS
Setup menu
Setup items
Factory Settings
Note *1: This function returns all fax settings stored on the fax board and reboots the product.
*2: And deletes all unfinished fax jobs stored on the memory.
1.3.3.3 Copy Mode
COPY OPERATION SETUP ITEMS
Setup menu
Setup items
Standard Settings
COPY FACTORY DEFAULT SETUP ITEMS
Setup menu
Setup items
Factory Settings
Revision B
Setup items
Remarks
Returns the current settings to
---
factory default.
Remarks
Sets the current value as a copy job
---
standard value.
Remarks
Returns the current settings to
---
factory default.
68