On-Site Service; On-Site Servicing Flowchart - Epson AcuLaser CX11 Service Manual

EPSON AcuLaser CX11/CX11F

6.2 On-site Service

This section describes about on-site servicing procedures.To prevent possible accidents
during servicing, strictly observe the warnings and cautions given in this section and
Section 6.1.Never perform dangerous operations.
When it is necessary to transport the main unit, use the special
C A U T I O N
packing material, pallet, etc.
Be sure to bring back trash created during the work and old
parts or consumables that are replaced, and not to leave them
on the site.
Before starting your work, spread a sheet of cloth or paper
over the working place to prevent the site from getting dirt with
spilt toner.
MAINTENANCE

ON-SITE SERVICING FLOWCHART

1. Ask the user about the printer conditions.
2. Ensure safety.
3. Grasp the printer conditions from the status sheet.
4. Grasp how the printer has been used from the engine status sheet.
Trouble Repeatability Check
Perform troubleshooting according
to the procedure given in
Figure 6-1. On-site Servicing Flowchart
On-site Service
What to Do First
Which is the Purpose of Visit?
Chapter 3. Repair Maintenance
Image Quality Check
Cleaning
Preventive maintenance
Replacement of regular replacement
parts and main after-sales service parts
General operation checks
What to Do Last
1. Check the printer appearance.
2. Train the user as necessary
Revision B
547