EPSON AcuLaser CX11/CX11F
Maintenance mode
After entering maintenance mode, the engine process control is executed forcibly.
After the printer enters the Maintenance mode, engine process control (Calibrating
Printer) is performed after printing since the process control is a cycle process
control.
1.3.4.2 Other Special Operations
MAINTENANCE FUNCTION SETUP ITEMS
Setup menu
Engine Status Sheet
Exits setup mode and returns to printer mode.
Print Log Report
Exits setup mode and returns to printer mode.
Reset 2ndBTRCounter
The printer reboots.
Reset C DvlpCounter
The printer reboots.
Reset M DvlpCounter
The printer reboots.
Reset Y DvlpCounter
The printer reboots.
Reset K DvlpCounter
The printer reboots.
Reset Fuser Counter
The printer reboots.
Clear Error Log
MCU DATA Backup
MCU DATA Restore
MFP MAINTENANCE MODE
In MFP maintenance mode, self diagnosis and fax maintenance can be executed.
Initiation method and functions are described below. For details, refer to Chapter 3
"Troubleshooting".
Initiation method
Hold [Color], [Up], [Down], and [Right] and turn the printer ON.
List of functions
Remarks
---
---
---
manuals4you.com
manuals4you.com
Table 1-36. Self diagnosis
Setup menu
Printer
"3.3.1.1 Printer Self Diagnosis" (p134)
Scanner
"3.3.1.2 Scanner Self Diagnosis" (p134)
Fax
Panel
"3.3.1.4 Panel Self Diagnosis" (p135)
B unit
"3.3.1.5 B Unit Self Diagnosis" (p136)
Table 1-37. Fax maintenance
Setup menu
Memory clear
ALL
FAX user area
Fax system area
Fax system counter area
Fax error history area
Fax system parameter area
Memory check
Read data
Write data
Parameter check
Read data
Write data
Module check
Whole
Image memory
Modem
Gate array
Flash memory
Signal check
Parameter
Revision B
Reference
"3.3.1.3 Fax Self Diagnosis" (p135)
Reference
"3.3.2.1 Memory Clear" (p138)
"3.3.2.2 Memory Check" (p139)
"3.3.2.2 Memory Check" (p139)
"3.3.2.2 Memory Check" (p139)
"3.3.2.5 Signal Check" (p142)
70