EPSON AcuLaser CX11/CX11F
REINSTALLATION
1.
Attach COVER ASSY TOP to the main unit with the COVER ASSY TOP opened.
When performing the following work, use the outer of the two
C A U T I O N
grooves located on the stud.
2.
Secure STOPPER PLATE to the main unit with the screw (silver, with flange, 8mm).
3.
Fasten COVER ASSY TOP with the 2 E-rings.
4.
Fit COVER LEG LH INNER to the main unit.
5.
Secure COVER LEG LH INNER to the main unit with the screw (silver, with flange, 8
mm).
6.
Fit COVER LEG LH OUTER to the main unit.
7.
Secure COVER SIDE LH ASSY to the main unit with the 2 screws (silver, with flange,
8 mm).
8.
Install Fuser ASSY.
(p415)
9.
Attach COVER ASSY RH..
(p326)
10. Attach COVER ASSY RH..
(p321)
DISASSEMBLY AND ASSEMBLY
Printer
Revision B
309