Cover Front L, Cover Front Assy U - Epson AcuLaser CX11 Service Manual

EPSON AcuLaser CX11/CX11F

4.2.2.10 COVER FRONT L, COVER FRONT ASSY U

REMOVAL
1. Remove COVER ASSY RH. (p326)
2. Remove COVER ASSY LH. (p321)
3. Remove COVER MSI. (p317)
4. Remove the 3 screws (silver, with flange, 8 mm) fastening COVER FRONT L to
the main unit.
5. Slide COVER FRONT L to the right, unhook the two hooks on the rear of COVER
FRONT L from the holes on the main unit, and remove COVER FRONT L
together with COVER FRONT ASSY U.
When performing the following work, take care not to damage the
C A U T I O N
COVER FRONT ASSY U boss.
6. Press the bosses on the left and right of COVER FRONT ASSY U by inserting a
screwdriver, and draw out from the holes on COVER FRONT L to remove
COVER FRONT ASSY U from COVER FRONT L.
DISASSEMBLY AND ASSEMBLY
4)
Figure 4-13. Removal of COVER FRONT L and COVER FRONT ASSY U (1)
6)-1
Figure 4-14. Removal of COVER FRONT L and COVER FRONT ASSY U (2)
Printer
manuals4you.com manuals4you.com
5)-1
4)
5)-2
4)
Leg_Sec03_009RB
Leg_Sec03_010EB
Revision B
6)-2
318