Epson AcuLaser CX11 Service Manual page 538

EPSON AcuLaser CX11/CX11F
5.2.2.3 Color Table Update
The procedure to update the Color Table is given below.
Procedure
1 Check the current version.
Print a status sheet, and check the current firmware version.
After turning the power off for both the printer and computer, connect them with a USB cable.
Connect the printer with the C A U T I O N
2
computer.
3 Prepare the update data.
Turn the computer on and copy the program update file (the extension is RCC) onto the computer.
4 Start up the Printer.
Start up the product in normal mode.
5 Prepare to send the data. Start up the Firmware Update Tool. Specify the port and the program update file on the selection window of the tool.
Click the [Send] on the Firmware Update Tool screen.
6 Transmit the data.
"Completion" pop-up window will be displayed when the data transfer is finished. Click on the [OK].
7 Print the status sheet.
Prints the status sheet.
Check the version on the status Confirm that the program firmware version has been updated correctly by comparing the status sheet with that printed in step 1.(Refer to
8
sheet. (p71))
ADJUSTMENT
Table 5-5. Color Table Update
Before connecting the USB cable, make sure to disconnect other interface cables from the product.
Method
Printer Section
manuals4you.com manuals4you.com
Revision B
" 1.4 Status Sheet"
540