Fip-P24 Stain; Fip-P25 Colored Dots At 150Mm Pitch - Epson AcuLaser CX11 Service Manual

EPSON AcuLaser CX11/CX11F

FIP-P24 Stain

Problems
Stains appear on the same position every time a color print is made.
The position changes when a B/W print is made.
It is caused by dirt on the Photoconductor Unit.
ESS and possible parts that caused the error
1. Photoconductor Unit
Before starting troubleshooting, inspect the feed path of the printer paper. Check the
paper feed path for metal staples, paper clips, paper scraps, and other foreign matter.
Step Check
Check after replacement of Photoconductor
1
Unit .
Replace the Photoconductor Unit.
Print the problem image, or execute a test print.
Was the trouble fixed?
TROUBLESHOOTING
Yes No
End of procedure Replace "ESS and
possible parts that
caused the error".
Printer
manuals4you.com manuals4you.com

FIP-P25 Colored Dots at 150mm Pitch

Problems
Colored dots appear spacing 150mm between them.
On a color printout, all the Y, M, C and K colored dots appear in a line and
position of them shift by page.
It is caused by a scratch on the Photoconductor Unit.
ESS and possible parts that caused the error
1. Photoconductor Unit
Before starting troubleshooting, inspect the feed path of the printer paper. Check the
paper feed path for metal staples, paper clips, paper scraps, and other foreign matter.
Step Check
Check after replacement of Photoconductor
1
Unit .
Replace the Photoconductor Unit.
Print the problem image, or execute a test print.
Was the trouble fixed?
Revision B
Yes No
End of procedure Replace "ESS and
possible parts that
caused the error".
278