Basic Specifications; Whole System; Outline Specifications; Warm Up Time - Epson AcuLaser CX11 Service Manual

EPSON AcuLaser CX11/CX11F

1.2 Basic Specifications

1.2.1 Whole System

1.2.1.1 Outline Specifications

WARM UP TIME

(Including ESS system check and RAM check)
37 seconds or less: From turning the power on to ready-to-print status.
(22 degrees C 55 %RH, rated voltage)
30 seconds or less: From standby mode to ready-to-print status.
(22 degrees C 55 %RH, rated voltage)
PRINTING MODE
Color mode (F/C)
Prints in color with Y, M, C, and K toners
Monochrome mode (B/W)
Prints in monochrome with K toner (The highest printing speed can be achieved in
this mode)
THROUGHPUT
Copy (TBD)
Color*
Copy Mode
A4/300dpi
First copy 29 sec
1
Multi copy* 5 ppm
2
ADF continuous copy* 5 ppm
Note *1: Makes multiple copies of one original
*2: Makes one copy of multiple originals using ADF
*3: Memory : Standard / Paper tray, MP tray/SC lamp
Printer : Ready-to-print status after the warm-up
3 3
Monochrome*
A4/600dpi A4/300dpi A4/600dpi
73 sec 12 sec 18 sec
5 ppm 25 ppm 25 ppm
1 ppm 25 ppm (TBD)
*6
Print
Table 1-1. Monochrome Print Mode (Unit: PPM)
Paper size*
LGL, GLG, F4
A4, A5, B5, LT, HLT, GLT, EXE
Envelopes
User defined size (lenght) 297.00 mm or less
Table 1-2. Color Print Mode (Unit: PPM)
Paper size*
LGL, GLG, F4
A4, A5, B5, LT, HLT, GLT, EXE
Envelopes
User defined size (lenght) 297.00 mm or less
Note *1: For details on the paper orientation, see
(p32).
*2: Standard mode (Color) : Feeds (prints) papers at the maximum speed of the color
Standard mode (B/W) : Feeds (prints) papers at the highest speed of the product.
*3: Low speed mode
*4: Low speed 1 mode
*5: Low speed 2 mode
*6: Note that the time given in the tables above does not apply when the printer is in the
ppm
conditions described in
Scan
Monochrome
Full color
manuals4you.com manuals4you.com
1 2
Standard*
20.0
25.0
---
25.0
1 2
Standard* Low speed 1*
2.3 TBD
5.0
---
5.0
" Supported paper size, type and orientation"
mode.
: For thick papers that exceed 163 g/m
(including transparency/envelope)
Feeds papers at low speed to maintain toner fixation
: For thick papers that exceed 105g/m
(including envelope/label)
Feeds papers at low speed to maintain toner fixation
: Feeds papers at low speed to maintain toner fixation when
printing on transparencies.
Section "1.2.2.7 Printer Engine Restrictions"
: 2 sec/A4, 300dpi
: 11 sec/A4, 300dpi
Revision B
3
Low speed*
4.0
4.0
4.0
4.0
4 5
Low speed 2*
---
2.3 1.9
2.3 ---
2.3 ---
2
(43 lb)
2
(28 lb)
(p39).
20