Epson AcuLaser CX11 Service Manual page 392

EPSON AcuLaser CX11/CX11F
8. Remove WIRE ASSY BTR, WIRE ASSY IBT and WIRE ASSY BCR from
GUIDE CRU ASSY AD.
9. Remove the screw (silver, with flange, tapping, 6 mm) fastening WIRE ASSY
DTN to GUIDE CRU ASSY AD.
10. Remove WIRE ASSY DTN from GUIDE CRU ASSY AD.
11. Remove SPRING-LATCH hooked onto the main unit and the stud of GUIDE
CRU ASSY AD.
12. Remove the screw (silver, with flange, tapping, 6 mm) fastening both PLATE-
ASSY GND and GUIDE CRU ASSY AD to the main unit, and remove PLATE-
ASSY GND.
10)
Figure 4-80. Removal of GUIDE CRU ASSY AD (2)
DISASSEMBLY AND ASSEMBLY
9)
8)
8)
8)
Leg_Sec03_082RB
13. Remove the 7 screws (silver, with flange, tapping, 6 mm) fastening GUIDE CRU
ASSY AD to the main unit.
14. Draw out the protrusion on GUIDE CRU ASSY AD from the hole on the main
unit, and remove GUIDE CRU ASSY AD.
14)
11)
Figure 4-81. Removal of GUIDE CRU ASSY AD (3)
Printer
manuals4you.com manuals4you.com
Revision B
13)
13)
13)
13)
12)-2
13)
12)-1
13)
13)
Leg_Sec03_083RB
394