Epson AcuLaser CX11 Service Manual page 463

EPSON AcuLaser CX11/CX11F
REINSTALLATION
When performing the following work, take care not to damage the
C A U T I O N
boss of the HOLDER ASSY RETARD 500.
1. Match SPRING RETARD with the boss on CHUTE ASSY 500, and attach
HOLDER ASSY RETARD 500 to CHUTE ASSY 500 while bending down the
bosses on both sides of HOLDER ASSY RETARD 500.
Make sure that SPRING RETARD is in the boss on HOLDER
C A U T I O N
ASSY RETARD 500 and the boss on CHUTE ASSY 500.
When performing the following work, take care not to damage
the boss of LEVER 500.
When performing the following work, pay attention to the
attachment direction of LEVER 500.
2. Attach LEVER 500 to CHUTE ASSY 500 while attaching SPRING LEVER 500
to the boss on CHUTE ASSY 500 and bending down the bosses on both sides of
LEVER 500.
Make sure that SPRING LEVER 500 is in the boss on LEVER
C A U T I O N
500 and the boss on CHUTE ASSY 500.
The protrusion on LEVER 500 must be firmly inserted into the
concave portion on the bottom of HOLDER ASSY RETARD
500.
3. Attach CHUTE ASSY 500. (p462)
4. Attach HOUSING ASSY FEED.
5. Attach DRIVE ASSY FEED. (p454)
6. Attach CLUTCH ASSY FEED.
7. Attach COVER LEFT 500. (p449)
8. Attach COVER RIGHT 500. (p451)
9. Attach CHUTE FDR ASSY 500.
10. Attach 500 PAPER CASSETTE ASSY.
DISASSEMBLY AND ASSEMBLY
(p472)
(p457)
(p450)
(p442)
Printer
Revision B
465