Fip-P19 Entirely Thin - Epson AcuLaser CX11 Service Manual

EPSON AcuLaser CX11/CX11F

FIP-P19 Entirely Thin

Before starting troubleshooting, inspect the feed path of the printer paper. Check the
paper feed path for metal staples, paper clips, paper scraps, and other foreign matter.
Step Check
Check connector of PWBA HVPS.
1
Check connection of connector (P/J505) of
PWBA. Also, make sure that 2ND BTR ASSY
that contacts with T2 shown in the figure left is
correctly attached.
Print the problem image. Or, execute the test
print.
Was the trouble fixed?
TROUBLESHOOTING
Problems
Strong faintness occurs on entire surface. This
occurs due to disconnection of connector
(F) from PWBA HVPS.
ESS and possible parts that caused the error
WIRE ASSY 2BTR
PWBA HVPS
Yes No
End of procedure Replace "ESS and
possible parts that
caused the error".
Connecting location of the connectors
Printer
manuals4you.com manuals4you.com
Revision B
T2
(2BTR)
F
274