EPSON AcuLaser CX11/CX11F
13. Remove the two screws (M3 x 8 mm, P-type, A-head) that secure the FIX PLATE
ASSY to the ADF FRAME UNIT, and remove the FIX PLATE ASSY.
14. Remove BUSH D6 from the shaft of the TURNING ROLLER and the shaft of the
EXIT ROLL ASSY respectively.
15. Remove the two screws (M3 x 8 mm, P-type, A-head) that secure the GUIDE
FRONT ASSY to the ADF FRAME UNIT, and remove the GUIDE FRONT
ASSY.
FIX PLATE ASSY
Figure 4-202. Removal of GUIDE FRONT ASSY (5)
DISASSEMBLY AND ASSEMBLY
13)
Shaft of TURNING ROLLER
Figure 4-203. Removal of GUIDE FRONT ASSY (6)
Figure 4-204. Removal of GUIDE FRONT ASSY (7)
ADF Section
Revision B
14)
Shaft of EXIT ROLL ASSY
GUIDE FRONT ASSY
15)
513