Epson AcuLaser CX11 Service Manual page 641

EPSON AcuLaser CX11/CX11F
Maintenance
Code
Label
Main Sub
LIN_TAM_SOUNDLESS_LEVEL 300
LIN_TAM_SOUNDLESS_TIME 300
LIN_DRPD_ON_MIN 300
LIN_DRPD_ON_MAX 300
LIN_DRPD_OFF_MIN 300
LIN_DRPD_OFF_MAX 300
LIN_OFFHOOK_ALARM 300
LIN_EARTH_TIME 300
LIN_FLASH_TIME 300
APPENDIX
Table 7-18. List of System Parameter (Phone Line)
User Internal
Access Address
--- Noiseless level at TAM setting
041 06B
According to the noiseless level, a call received by an answer phone
(attached phone) is judged as a fax.
--- Noiseless time at TAM setting
042 06C
When the set noiseless level continues for the time, a call received
by an answer phone (attached phone) is judged as a fax.
--- Minimum ON time of distinctive ring
043 06D
--- Maximum ON time of distinctive ring
044 06E
--- Minimum OFF time of distinctive ring
045 06F
--- Maximum OFF time of distinctive ring
046 070
--- Enables or disables the off-hook alarm after finishing fax
047 071
communication
The alarm goes off when off-hook condition of the attached phone is
detected after finishing fax communication.
--- Earth time
048 072
Earthing time when the outside line connecting method is earth start.
--- Flash time
050 073
Flashing time when the outside line connecting method is flash start.
Description
Fax Unit System
Setting Value
0 = -43dBm
1 = -40dBm
2 = -39dBm
3 = -38dBm
0 to 25.5 sec (1 step = 100 ms)
0 to 25.5 sec (1 step = 100 ms)
0 to 25.5 sec (1 step = 100 ms)
0 to 25.5 sec (1 step = 100 ms)
0 to 25.5 sec (1 step = 100 ms)
0 = Disable
1 = Enable
100 to 1000 ms (1 step = 10 ms)
100 to 1000 ms (1 step = 10 ms)
Revision B
Default Remarks
---
-43dBm
(0)
---
5.0 seconds
(50)
1.6 seconds ---
(16)
2.4 seconds ---
(24)
3.2 seconds ---
(32)
4.8 seconds ---
(48)
Disable Not used
(0)
---
300ms
(30)
---
320ms
(32)
643