Safety Information; Power Supply - Epson AcuLaser CX11 Service Manual

To prevent accidents during a maintenance procedure, strictly observe the Warnings and Cautions and never depart from the instructions given in this document.
Do not do anything that is dangerous even if not specifically described in this manual.
In addition to the descriptions below and those given in this manual, there are many situations and circumstances that could result in serious bodily injury.
Always pay enough attention to secure safety when working with the printer.

Power Supply

Before starting any service procedure, turn the printer off and unplug the power cord
from the wall outlet. If you need to work on the printer with power applied, such as
voltage measurement, strictly follow the instructions in this manual and use extreme
caution to avoid an electric shock.
If you need to work on the printer with power applied, never
W A R N I N G
touch any electronic components other than the target
component.
The power supply switch/inlet part (MAIN POWER SWITCH
& INLET) is live even after the power switch is turned off. Use
extreme caution not to touch the live part when working on the
printer with the power supply cable connected.
Do not touch any live part unless instructed to do so.

Safety Information

Leg_001_002RA