Cable - Epson AcuLaser CX11 Service Manual

EPSON AcuLaser CX11/CX11F

4.4.1.2 CABLE

REMOVAL
1. Remove the Scanner. (p306)
2. Remove the ADF Unit. (p481)
3. Remove the ADF COVER R. (p492)
4. Disconnect P301 connector from the ADF PCB ASSY.
5. Remove the screw (M3 x 6 mm, S-type, A-head) that secures the grounding wire
of the CABLE, and remove the CABLE.
REINSTALLATION
1. Secure the grounding wire of the CABLE with the screw (M3 x 6 mm, S-type, A-
head).
2. Connect the CABLE connector to P301 connector on the ADF PCB ASSY.
3. Attach the ADF COVER R. (p492)
4. Attach the ADF Unit. (p481)
5. Install the Scanner. (p306)
DISASSEMBLY AND ASSEMBLY
CABLE
ADF Section
manuals4you.com manuals4you.com
Grounding Wire
4)
Figure 4-175. Removal of CABLE
Revision B
5)
494