Epson AcuLaser CX11 Service Manual page 423

EPSON AcuLaser CX11/CX11F
REINSTALLATION
When doing the following work, take care so that WIRE ASSY
C A U T I O N
DEVE, WIRE ASSY BTR, and FFC-ASSY ESS are not sandwiched
between the main unit and MOT ASSY ROT.
1. Match the boss on MOT ASSY ROT with the hole on the main unit, and attach.
2. Fasten MOT ASSY ROT to the main unit with the 4 screws (silver, with flange, 6
mm).
3. Connect connector (P/J433) to PWB ASSY ROT.
4. Fasten WIRE ASSY DEVE with the clamp.
5. Attach LV/HVPS. (p435)
6. Attach COVER FRONT L and COVER FRONT ASSY U.
7. Attach COVER MSI. (p317)
8. Attach COVER ASSY LH. (p321)
9. Attach COVER ASSY RH. (p326)
Table 4-10. Symptoms when the connector is loose
Connector
Panel Indication
No.
P/J433
Service Req E527
DISASSEMBLY AND ASSEMBLY
(p318)
Error Caused by Connector
Symptom
Disconnection
---
All LEDs flash
Printer
Revision B
425