Epson AcuLaser CX11 Service Manual page 258

EPSON AcuLaser CX11/CX11F
Step Check
Check of image secondary transfer process
10
Is the toner image on IBT BELT transferred
normally to the paper?
Execute a test print, turn the power OFF when
you think that the image transfer process is in
progress during printing, and check the paper.
Check of Heat Roll and Pressure Roll
11
Allow FUSER ASSY to cool down
W A R N I N G
before performing work.
Remove FUSER ASSY. (p.415)
Turn the Gear by hand, and inspect Heat Roll
and Pressure Roll.
Are Heat Roll and Pressure Roll scratched or
dirty and damaged?
TROUBLESHOOTING
Yes No
Go to Step [11]. Replace LV/
HVPS. (p.435)
Replace FUSER Replace "ESS and
ASSY. (p.415) possible parts that
caused the error".
Printer
manuals4you.com manuals4you.com
Revision B
260