Guide Side L, Guide Assy Side R - Epson AcuLaser CX11 Service Manual

EPSON AcuLaser CX11/CX11F

4.2.3.5 GUIDE SIDE L, GUIDE ASSY SIDE R

REMOVAL
1. Open COVER MSI.
2. Unhook the hooks fastening the holes at the center of GUIDE SIDE COVER and
the hooks at the left and right of GUIDE SIDE COVER from the holes on FRAME
ASSY BOTTOM, and remove GUIDE SIDE COVER.
3. Remove GEAR MANUAL from FRAME ASSY BOTTOM.
4. Slide GUIDE SIDE L to the right, remove the protrusion on GUIDE SIDE L from
the attachment section of FRAME ASSY BOTTOM, and remove GUIDE SIDE L.
5. Slide the lever of GUIDE ASSY SIDE R to the left, remove the protrusion of
GUIDE ASSY SIDE R from the attachment section of FRAME ASSY BOTTOM,
and remove GUIDE ASSY SIDE R.
REINSTALLATION
1. Match the protrusion of GUIDE ASSY SIDE R with the attachment section of
FRAME ASSY BOTTOM, insert the tension section of GUIDE ASSY SIDE R
into the groove of FRAME ASSY BOTTOM, and slide the lever of GUIDE ASSY
SIDE R to attach.
2. Match the protrusion of GUIDE SIDE L with the attachment section of FRAME
ASSY BOTTOM, insert the tension section of GUIDE ASSY SIDE L into the
groove of FRAME ASSY BOTTOM, and slide GUIDE ASSY SIDE L to the left
to attach.
3. Open GUIDE ASSY SIDE R and GUIDE ASSY SIDE L as far as possible, and
attach GEAR MANUAL to FRAME ASSY BOTTOM.
4. Attach GUIDE SIDE COVER to FRAME ASSY BOTTOM, fasten the hooks on
the left and right of GUIDE SIDE COVER, and fasten the hole at the center of
GUIDE SIDE COVER by the hook on FRAME ASSY BOTTOM to attach
GUIDE SIDE COVER.
5. Close COVER MSI.
DISASSEMBLY AND ASSEMBLY
2)-1
Figure 4-29. Removal of GUIDE SIDE L and GUIDE ASSY SIDE R (1)
Figure 4-30. Removal of GUIDE SIDE L and GUIDE ASSY SIDE R (2)
Printer
Revision B
2)-2
2)-1
3)
2)-1
Leg_Sec03_045EA
4)
5)-1
5)-2
Leg_Sec03_046EA
335