EPSON AcuLaser CX11/CX11F
LCD DISPLAY AFTER THE SYSTEM START-UP
Moves to print mode initial screen after displaying start-up screen for 2 seconds.
Start-up screen
After 2 Seconds
Print mode initial
screen
Figure 1-10. LCD Display after the System Start-up
Alert screen
An alert screen displays warning, guidance or any other message informing
Contents of the Initial Screen
Top line Left
Four
lines
from the
Toner remaining
amount icon
bottom
Fax reception data
accumulation icon
restricted function.
manuals4you.com
manuals4you.com
Top line: Status, Guidance
Upper right: toner remaining amount, fax reception data accumulation icon
Four lines from the bottom: Messages appears as follows
1st line : Warning message
2nd line : Operation, status message
3rd line : Operator guidance, time display
4th line : Paper size, paper remaining amount
Display
status, guidance
Right
Toner remaining amount icon Displays 11 levels to indicate 0 to 100 % by
Fax reception data
accumulation icon
1st line Warning message
2nd
Operation, status messages
line
3rd line Operator guidance, time
display
4th line Paper size, paper remaining
amount
Size of paper loaded on the paper feeder is displayed with two or three letters
as shown in the table below.
Paper size:
Program
A4
A4
A5
A5
B5
B5
Letter
LT
Half Letter
HLT
Legal
LGL
Government Letter
GLT
Government Legal
GLG
Revision B
Description
Displays mode and status
10% in the order of K, C, M, and Y.
Only displayed when there are received fax
jobs remaining unprinted in the memory. It is
not displayed for accumulated sending jobs.
Only displayed when warnings occurred.
Statuses such as ready-to-print, unable to
print, or sleep mode are displayed.
Only displayed when the time is set.
Indicates four levels (0, 33, 66, 100 %) in the
order of MP tray and the cassette.
Only displayed when they are installed.
Paper size:
Program
Executive
EXE
F4
F4
Monarch
MON
C10
C10
DL
DL
C5
C5
C6
C6
ISO B5
IB5
50