Transfer; Chute Assy-Fsr, Cover Assy-Rr 2Nd - Epson AcuLaser CX11 Service Manual

EPSON AcuLaser CX11/CX11F

4.2.5 TRANSFER

4.2.5.1 CHUTE ASSY-FSR, COVER ASSY-RR 2ND

REMOVAL
CHUTE ASSY-FSR
1. Open CHUTE ASSY-FSR.
When performing the following work, take care not to remove
C A U T I O N
CHUTE ASSY-FSR too far as it is connected by a harness.
2. Press the hinge on CHUTE ASSY-FSR to the inside with a flat-blade screwdriver
or a similar tool, and remove CHUTE ASSY-FSR from the main unit.
When performing the following work, leave the intermediate
C A U T I O N
connector on the harness side.
3. Disconnect the connector (P/J620) from CHUTE ASSY-FSR connected to the
main unit.
DISASSEMBLY AND ASSEMBLY
1)
2)-1
Produsion
Figure 4-58. Removal of CHUTE ASSY-FSR
Printer
manuals4you.com manuals4you.com
2)-2
3)
2)-1
Produsion
Leg_Sec03_511RA
Revision B
366