Epson AcuLaser CX11NF Supplementary Manual

Setting Your AcuLaser CX11NF to Receive
Faxes
By default your Epson AcuLaser
ring pattern telephone calls. This may prevent the AcuLaser CX11NF
from receiving incoming faxes.
If your AcuLaser CX11NF does not pick up a telephone or fax call,
follow these steps to change the DRPD (Distinctive Ring Pattern
Detection) setting:
1. Press
the
The Setup light turns on and the LCD screen displays Setup
Mode for a few seconds, and then changes to the Setup menu.
2. Press the
d
button.
3. Press the
d
press the
r
4. Press the
d
button.
5. Press the
u
DRPD is set to
6. Press t
he
Your telephone company can add a second telephone number to your
main telephone line that will ring with a distinctive pattern. DRPD
allows the AcuLaser CX11NF to distinguish between different ring
patterns. When DRPD is set to
will only answer the distinctive ring and ignore the one regular ring.
© 2005 Epson America, Inc. 7/05
Printed in USA
button.
Setup
button twice to select
button twice to select
button.
button three times to select
button to select
.
ALL
button to exit the menu.
Setup
®
CX11NF is set to receive distinctive
Fax Settings
Reception Settings
DRPD
. Then press the
ALL
, the AcuLaser CX11NF
NORMAL
. Then press the
. Then
. Then press the
button.
r
CPD-20347
r
r