Snmp-Server View - Motorola BSR 64000 Reference Manual

snmp-server view

The snmp-server view command defines an SNMPv2 MIB view. The no
snmp-server view command removes the defined view.
Group Access
System Administrator
Command Mode
Global Configuration
Command Line Usage
snmp-server view <word> [<oid-tree> | at | bgp | directory | docsif | dod | dot3 |
dvmrp | egp | experimental | icmp | ifmib | igmp | interfaces | internet | ip | iso |
mgmt | mib-2 | org | ospf | ppp | private | rip2 | riverdelta | security | snmp |
snmpv2 | sonet | system | tcp | transmission | udp | vrrp ] {included | excluded}
no snmp-server view <word> [<oid-tree> | at | bgp | directory | docsif | dod | dot3 |
dvmrp | egp | experimental | icmp | ifmib | igmp | interfaces | internet | ip | iso |
mgmt | mib-2 | org | ospf | ppp | private | rip2 | riverdelta | security | snmp |
snmpv2 | sonet | system | tcp | transmission | udp | vrrp ] {included | excluded}
Command Syntax
word
oid-tree
at
bgp
directory
docsif
dod
used for reference identification to view
record being generated or removed reference
identification
subtree of MIB view family name (ex:
1.3.6.1.= internet, 1.3.6.1.2.1.1 = system)
AT MIB group
BGP MIB group
directory MIB group
docsisIf MIB group
DOD MIB group
SNMP Commands
3-39