BSR 64000 Command Reference Guide
show cable qos svc-flow phs
The show cable qos svc-flow phs command displays the payload header suppression
(PHS) configured for an interface that is used for a specific service flow.
Note: If the PHS is not specified, all PHS entries with the specified SFIDs are
listed.
Group Access
All
Command Mode
All modes except User EXEC
Command Line Usage
show cable qos svc-flow phs [<slot>/<interface> [<svc-flow-id> [<phs-id>]]]
Command Syntax
slot
interface
svc-flow-id
phs-id
Command Default
Displays all of the service flows in the system.
13-144
DOCSIS module slot number.
Cable interface number.
Service flow 1-4,294,967,295.
Payload header suppression 1-255.