crc
The crc command sets the mode of the cyclic redundancy check (CRC).
Use the crc command supports four checksum formats. The checksum formats are: 16
bits, 16 bits big-endian, 32 bits, and 32 bits big-endian. The checksum format must be
synchronized on both ends of a PPP link for the link to come up.
Group Access
ISP
Command Mode
Interface Configuration
Command Line Usage
crc {16 | 32} [big-endian]
Command Syntax
16
32
big-endian
Command Default
16
16 bits
32 bits
use big-endian byte ordering
POS Commands
15-3