Ip Policy Route-Map - Motorola BSR 64000 Reference Manual

BSR 64000 Command Reference Guide

ip policy route-map

The ip policy route-map command identifies the route-map used on an interface to
perform policy-based routing. The no ip policy route-map command removes the
route-map on an interface, and disables policy-based routing on that interface.
Use the ip policy route-map command for paths other than the shortest path. This
command has associated match and set commands: match commands specify policy
routing rules, set commands perform tasks
Group Access
ISP
Command Mode
Interface Configuration
Command Line Usage
ip policy route-map <WORD>
no ip policy route-map <WORD>
Command Syntax
WORD
Command Default
No policy routing
6-6
route-map name that must match a specified
map tag