Show Interfaces Pos - Motorola BSR 64000 Reference Manual

BSR 64000 Command Reference Guide

show interfaces pos

The show interfaces pos command displays the SONET interface configuration. The
following information is provided:
POS 15/0 is
administratively
up/down, line
protocol is up/down
Hardware
MTU
BW
Encapsulation
Keepalive
Scramble
LCP Initial
IPCP Initial
Last input
Last output
Last clearing
Last state change
Queueing strategy
Output queue,
drops/input queue,
drops
packets input
15-26
indicates whether the interface hardware is currently active and
can transmit and receive or if it has been taken down by an
administrator
hardware type
maximum transmission units of the interface
interface bandwidth in kilobits per second
encapsulation method assigned to interface
keepalive set indicator
POS scramble enable
LCP initialized
IPCP initialized
hours, minutes, and seconds since the last packet was
successfully received by an interface.; useful for knowing
when a dead interface failed
hours, minutes, and seconds since the last packet was
successfully transmitted by an interface
of show interface counters
hours, minutes, and seconds when the interface was reset
first-in, first-out queuing strategy (other queueing strategies
you might see are priority-list, custom-list, and weighted fair)
number of packets in output and input queues. Each number is
followed by a slash, the maximum size of the queue, and the
number of packets dropped because a queue was full
error-free packets received by the system