Cable Upstream Range-Backoff - Motorola BSR 64000 Reference Manual

cable upstream range-backoff

Use the cable upstream range-backoff command to set the start and end upstream
range-backoff values for a CM or re-establish a CM if a power outage occurs. Use the
no cable upstream range-backoff command return the ranging back-off default
value. If you choose automatic, the system sets the upstream data-backoff start and
end values.
Group Access
MSO
Command Mode
Interface Configuration
Command Line Usage
cable upstream [<port>] range-backoff [automatic] <start> <end>
no cable upstream [<port>] range-backoff [automatic] <start> <end>
Command Syntax
port
automatic
start
end
Command Default
start 0, end 4
Upstream port number.
automatic data backoff
0 to 15
0 to 15
CMTS Commands
13-75