Motorola BSR 64000 Reference Manual page 289

To configure an extended access list for IGMP, use the following command:
access-list <100-199> <2000-2699> {deny | permit} igmp {<A.B.C.D> <A.B.C.D> |
any | host <A.B.C.D>} (<A.B.C.D> <A.B.C.D> | any | host <A.B.C.D>} [<0-255> |
dvmrp | host-query | host-report | pim ]
To configure an extended access list for TCP, use the following command:
access-list <100-199> <2000-2699> {deny | permit} tcp {<A.B.C.D> <A.B.C.D> |
any | host <A.B.C.D>} (<A.B.C.D> <A.B.C.D> | any | host <A.B.C.D>} [eq
[<0-65535> | bgp | chargen | cmd | daytime | discard | domain | echo | exec | finger
| ftp | ftp-data | gopher | hostname | ident | irc | klogin | kshell | login | lpd | nntp |
pim-auto-rp | pop2 | pop3 | smtp | sunrpc | talk | telnet | time | uucp | whois |
www ]]
To configure an extended access list for UDP, use the following command:
access-list <100-199> <2000-2699> {deny | permit} udp {<A.B.C.D> <A.B.C.D> |
any | host <A.B.C.D>} (<A.B.C.D> <A.B.C.D> | any | host <A.B.C.D>} [eq
[<0-65535> | biff | bootpc | discard | domain | echo | mobile-ip | netbios-dgm |
netbios-ns | netbios-ss | ntp | pim-auto-rp | rip | snmp | snmptrap | sunrpc | syslog |
talk | tftp | time | who | xdmcp ]]
To remove an access list, use the following command:
no access-list <100-199> <2000-2699>
Command Syntax
100-199
2000-2699
deny
extended access list
extended IP access list (expanded
range)
deny access if conditions are
matched
Access List Commands
5-5