BSR 64000 Command Reference Guide
iip rip receive version
The ip rip receive version command
packets from a specific version of the
version command to configure the interface to receive one or both RIP versions. The
no ip rip receive version command resets the RIP protocol version to RIP version 1
and 2.
Group Access
ISP
Command Mode
Interface Configuration
Command Line Usage
ip rip receive version {0, 1, 2}
no ip rip receive version {0, 1, 2}
Command Syntax
0
1
2
Command Default
0
7-10
configures an interface to only receive
RIP protocol. Use the ip rip receive
RIP version 1 and 2
RIP version 1 only
RIP version 2 only